- Home
- About us
- Mineral Processing EPC
- Products
-
- Crushing
- Screening
- Grinding
- Classifying
- Agitation Equipment
- Flotation
- Gravity Separation Equipment
- Magnetic Equipment
- Thickening
- Dewatering Machine
- Gold Extraction Equipment
- Feeding
- Transmission Equipment
- Iron Removal Equipment
- Automatic Control Equipment
- Wear – Resistant Rubber Products
- Valves
- Hydrocyclone
- Pumps
-
- Solutions
- Cases
- News
- Contact Us
Home > Products > Magnetic Equipment>Magnetic Drum
Magnetic Drum
- Introduction
- A dry magnetic separator for strong magnetic minerals with coarse particles, and it is also called magnetic pulley.
- Capacity
- 20-600t/h
- Product Improvement
- Cylinder could be lined with Yantai Group wear- resistant rubber to prolong the service life
Advantages
Large feeding particle size（450～0mm），no classification before feeding。
High strength and high reliability of the mechanical structure guarantee the normal work of the magnetic drum in a variety of harsh environment.
Product Description
Permanent magnetic drum is also called magnetic pulley,apparatus magnetic equipment for magnetite ore, mainly used for pre concentration before fine crushing or grinding to remove the gangue, deads and tailings, and the tailings out rate is about 10%.
Work Principle
The materials are uniformly fed to the belt. When materials go through the permanent magnetic drum, the non-magnetic and low-magnetic particles will leave the belt surface because of the centrifugal force and gravitation. Meanwhile, strong-magnetic particles are absorbed to the belt by magnetic force and then fall into the magnetic trough when the belt leaving the magnetic pulley.
Product Application
1, It is applied in lean iron roughing after the roughing crushing or middling crushing to remove deads, improve grade, and reduce the load of the next procedure.
2, For not fully reductive raw ore of hematite reduction
3, For the ceramic industry to remove iron and improve the quality of ceramic products
4, For other industries needing to remove iron, such as Burning coal, sand casting, refractory material, etc.
Technical Parameters
| Model & Spec. | Diameter of Cylinder (mm) | Length of Cylinder (mm) | Width of Belt (mm) | Surface Magnetic Density (mt) | Capacity (t/h) |
Feed Size (mm) | Total Weight (t) |
| CTGG-0812 | 800 | 1200 | 1000 | 300~500 | ≤100 | ≤200 | 2.1 |
| CTGG-0814 | 800 | 1400 | 1200 | 300~500 | ≤120 | ≤200 | 2.6 |
| CTGG-0816 | 800 | 1600 | 1400 | 300~500 | ≤150 | ≤200 | 3.2 |
| CTGG-0818 | 800 | 1800 | 1600 | 300~500 | ≤180 | ≤200 | 3.9 |
| CTGG-1018 | 1000 | 1800 | 1600 | 300~500 | ≤270 | ≤250 | 4.4 |
| CTGG-1218 | 1200 | 1800 | 1600 | 300~500 | ≤350 | ≤300 | 5.0 |
Related Products
Dry Separator with Eccentric Rotating Magnetic System | Magnetic Separator | Magnetic Drum |
Tel: 0086-153-1182-6627
E-mail: mhxu@xinhaimining.net
Leave Message
Leave Message